LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1971 >> 2800CS Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> BMW Engines - 2500, 2800, 3.0 & BAVARIA 6 Cylinder >> Rear Intake Manifold Removal

Rear Intake Manifold Removal

  1. Disconnect battery ground cable and drain cooling system. Remove air cleaner and disconnect fuel and vacuum lines to carburetor. Disconnect thrust rod and support bracket.
  2. Disconnect electrical connections at automatic choke and remove choke cover. Remove water hoses and intake manifold. To install, reverse removal procedure and make sure rotary shaft has some side clearance.
scientia non olet · About LEMON Manuals