Pedal Adjustment
- When pedal is in fully up position, pedal must lie against limit stop. Distance between pedal plate and horn ring must be between 5.7-5.9" (145-150 mm).
- If distance is less than 5.3" (135 mm), an oversize master cylinder push rod of 4.37" (111 mm) length must be installed. If distance is 5.3-5.5" (135-140 mm), an oversize push rod of 4.29" (109 mm) length must be installed.NOTE: Distance should never exceed 5.9" (150 mm) under any circumstances.