Hydraulic System Bleeding
Attach a suitable hydraulic system bleeder to master cylinder. Open bleeder plug and allow system to bleed. Bleeding operation is complete when air bubbles are no longer seen in container.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) |
|---|---|
| Clutch-to-Flywheel | 12 (1.6) |
| Fluid Pressure Line-to-Cylinders | 12 (1.6) |
| Master Cylinder Retaining Bolts | 15 (2.0) |
| Transmission-to-Engine (8 mm Bolts) | 18 (2.5) |
| Transmission-to-Engine (10 mm Bolts) | 34 (4.7) |
| Clutch Pedal Through Bolt | 24 (3.3) |