LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1966 >> 2000cs _NA_, Not Available Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - (4 Cylinder) >> Overhaul >> Front Disc Brake Caliper >> Disassembly

Front Disc Brake Caliper: Disassembly

With caliper removed from vehicle, remove rubber protective caps, taking care not to damage pistons. Insert a piece of wood in caliper cavity, and remove pistons by applying compressed air to inlet holes of caliper. Using a plastic (or other soft material) tool, remove sealing rings from caliper bores.

NOTE: Do not separate caliper halves unless a leak is detected.

To disassemble caliper, remove expansion bolts and separate caliper halves. Remove sealing rings.

scientia non olet · About LEMON Manuals