All Models Rear (1970-73)

Install washer, lock washer and nut. Torque nut to 80-145 ft. lbs. (11.056-20.039 mkg) and bend lock washer or install cotter pin (station wagon). To check end play, remove wheel. Fix the stand of a dial indicator on the trailing arm and measure the play at a point 3.5" (88.9 mm) from center of drum, maximum 0.016" (.406 mm) end play and play at center of drum, maximum 0.012" (.304 mm) end play. If not within specifications, check torque of nut, bearing fitting surface of drum and bearing for wear. Adjust or replace as necessary.