Overview - Assembly Mounts

Fig 1: Exploded View Of Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 55 Nm
Tunnel Crossmember
- There are different versions depending on the model
- Removing and Installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
Nut
- Only remove if the transmission mount must be separated from the transmission support
- 20 Nm
Transmission Support
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING (4 CYL) , or TRANSMISSION MOUNT, REMOVING AND INSTALLING (6 CYL) .
Bolt
- 40 Nm
Transmission Mount
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING (4 CYL) , or TRANSMISSION MOUNT, REMOVING AND INSTALLING (6 CYL) .
Stop
- For the transmission mount
Bolt
- Only remove if the transmission mount must be separated from the transmission support
- Replace
- 20 Nm +90°
Nut
- 20 Nm