LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing (7-Speed Dual Clutch Transmission 0CK, 0CJ, 0DP, 0DN) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications

Transmission Tightening Specifications

Transmission to 4-Cylinder TDI engine:

Fig 1: Transmission Mounting Bolts and Alignment Sleeves (4-Cylinder TDI Engine)
GWWA34-11232Courtesy of AUDI OF AMERICA, LLC
Item Bolt Tightening specification [Nm]
1 (1) M10 x 50 65
2 (1) M12 x 100 (2) 30 + 90°
3 M12 x 70 (2) 30 + 90°
4, 5 M12 x 120 (2) 30 + 90°
6 M12 x 85 (2) 30 + 90°
7, 8 M10 x 40 (2) 15 + 90°
9 M12 x 50 (2) 30 + 90°
(1) Starter bolt
(2) Only use aluminum bolts twice
A Alignment sleeve for centering

Transmission to 4-Cylinder TFSI engine:

Fig 2: Transmission Mounting Bolts and Alignment Sleeves (4-Cylinder FSI Engine)
GWWA34-11495Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 (1) M10x50 65
2 (1) M12 x 100 (2) 30 + 90°
3 M12x70 (2) 30 + 90°
4, 5 M12x120 (2) 30 + 90°
6 M12x85 (2) 30 + 90°
7 M12 x 100 (2) 30 + 90°
8, 9 M10x40 (2) 15 +90°
10 M12x50 (2) 30 + 90°
A Alignment sleeves for centering
(1) Starter bolt
(2) Only use aluminum bolts twice
A Alignment sleeve for centering

Transmission to 6-Cylinder TFSI/TDI engine:

Fig 3: Transmission Mounting Bolts and Alignment Sleeves (6-Cylinder TDI Engine)
GWWA34-11518Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 (1) M10x50 65
2 (1) M12 x 100 (2) 30 + 90°
3, 4, 5, 6 M12 x 100 (2) 30 + 90°
7 M12 x 125 (2) 30 + 90°
8, 9 and 10 M10 x 60 (2) 15 +90°
A Alignment sleeves for centering
(1) Starter bolt
(2) Only use aluminum bolts twice
A Alignment sleeve for centering
scientia non olet · About LEMON Manuals