Overview - Transmission Fluid Circuit

Fig 1: Drain Plug Locations, ATF & MTF

Courtesy of AUDI OF AMERICA, LLC

Drain Plug
- for the ATF
- Bayonet connection
- Always replace after removing
- Tighten all the way
Plug
- For ATF check and fill hole
- Bayonet connection
- Always replace after removing
- Tighten all the way
Plug
- For transmission fluid inspection and fill hole
- Always replace after removing
- 35 Nm
Transmission Fluid Pump (MTF Pump)
- with seal welded on
- Replace the transmission fluid pump if the seal is damaged.
- Must be removed to drain the transmission fluid (MTF)
- Replace the bolts after removing them.
- Refer to Transmission Fluid Pump, Removing and Installing .
- 3 Nm + 90°