Solenoid Valves And Pressure Regulating Valves In Valve Body, Removing And Installing: Installing
-- Coat the valve surface with ATF and push in the valves all the way.
-- Attach and hold the connection of Solenoid Valve 5 - N92- -arrow-.
-- Evenly align the connections using the Precision Straight Edge (2 pc.) : T40100 -A-.
-- Connect the contact element evenly.
-- Install the mounting rail and tighten the bolts -arrows- to the tightening specification.
-- Tighten the bolts -arrows- to the tightening specification.
-- Install the Transmission Control Module -J217-. Refer to TRANSMISSION CONTROL MODULE J217, REMOVING AND INSTALLING .
-- Install the Mechatronic. Refer to Mechatronic, Removing and Installing .
-- After replacing the solenoid valves, the "Calibration of Cooling Oil/Clutch Valve" function must be performed using the Vehicle diagnostic tester . Refer to DIAGNOSTIC ENTRY .