Overview - Valve Body

Fig 1: Exploded View Of Mechatronic Valve Body

Courtesy of AUDI OF AMERICA, LLC

Valve Body
- Removing and installing. Refer to Transmission Control Module J217, Removing and Installing .
Valve Unit Retainer
Bolt
- M4x35
- Quantity: 8
- Always replace after removing
- 2.5 Nm + 60°
Bleed Pipe
Seal
- Always replace after removing
Seal
- Always replace after removing
Transmission Fluid Auxiliary Hydraulic Pump -V552- Motor
- Removing and installing. Refer to TRANSMISSION FLUID AUXILIARY HYDRAULIC PUMP - V552, REMOVING AND INSTALLING .
Cover
Bolt
- M5x22
- Quantity: 4
- Always replace after removing
- 4 Nm + 45°
Transmission Fluid Auxiliary Hydraulic Pump -V552- Pump
- Removing and installing. Refer to TRANSMISSION FLUID AUXILIARY HYDRAULIC PUMP - V552, REMOVING AND INSTALLING .
Seal
- Always replace after removing
Seal
- Always replace after removing