Overview - Transmission Control Module J217

Fig 1: Exploded View Of Transmission Control Module -J217-

Courtesy of AUDI OF AMERICA, LLC

1. Protective Cap
2. Seal
   • Always replace after removing
   • Pay attention to the installation position. Refer to Fig 2.
3. Valve Body
4. Bolt
   • Quantity: 3
   • Always replace after removing
   • 5 Nm + 20°
5. Cover
   • Present depending on the version
6. Transmission Control Module -J217-
7. Bolt
   • Quantity: 4
   • Always replace after removing
   • 3 Nm + 90°

Fig 2: Identifying Seal

Courtesy of AUDI OF AMERICA, LLC