Overview - Assembly Mounts

Fig 1: Exploded View Of Dual Clutch Transmission Mount

GWWA10-11614

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 70 Nm
Tunnel Crossmember
- Refer to Tunnel Crossmember, Removing and Installing .
Stop
- For the transmission mount
Transmission Mount
- Refer to Rear Transmission Mount, Removing and Installing .
Transmission
Nut
- 20 Nm
Transmission Support
- Refer to Rear Transmission Mount, Removing and Installing .
Bolt
- 40 Nm
Bolt
- Always replace after removing
- 20 Nm +90°
Nut
- 20 Nm