Identification Plates
WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- When replacing components, the existing identification plates on the old parts that indicate the replacement part number (refer to Electronic Parts information (ETKA)) must be attached to the new part according to the specifications.
- If any identification, warning, or information labels found on vehicle components are illegible or destroyed, replace them and attach them in the same location as the original labels. Refer to the Electronic Parts information (ETKA) for the allocation.