LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (General, Technical Data (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On Exhaust System

Safety Precautions When Working On Exhaust System

WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

There is a risk of injury due to the exhaust system components

It is possible to injure hands and other parts of the body due to hot and sharp-edged components in the exhaust system.

-- Allow the exhaust system to cool.

-- Wear safety gloves.

   
   

Health risk due to chemical materials in the exhaust system components.

Health risk due to disassembled components of the exhaust gas treatment.

-- Never cut, open or saw the components of the exhaust gas treatment.

   
   

Risk of injury due to hot condensation and particles in the exhaust system.

Hot condensation and particles can be in the exhaust system. Injury to the eyes, skin and respiratory system and poisoning are possible.

-- Wear safety gloves.

-- Wear protective eyewear.

-- In closed areas switch on the exhaust extracting system.

   
   

Risk of injury due to hot condensation and particles in the exhaust system.

Hot condensation and/or particles may be in the exhaust system. It is possible for eye and skin injury as well as respiratory system injury and poisoning to occur.

-- When performing separating procedures on the exhaust system, wear safety gloves and protective eyewear.

-- Use an extracting system for separating procedures or make sure there is enough ventilation.