Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
All except Audi Q7/Q8:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Continuation for All Vehicles:
-- Disconnect the connector -1-.
-- Remove the bolt -2- and then remove the Camshaft Position Sensor 3 -G300-.