Tank Ventilation Pressure Sensor 1 -G950-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal, while noting the following:
- Check the O-ring in the Tank Ventilation Pressure Sensor 1 -G950- for damage. Refer to OVERVIEW - CRANKCASE VENTILATION .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .