Sliding Bar Ball, Installing: Installing

WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in -direction of arrow A- using the Camshaft Spacer :T40191/1 and hold.

-- Push the sliding bar -3- in the -direction of arrow B-.