Flywheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING .
CAUTION:
Risk of damaging the dual mass flywheel due to improper handling.
- When loosening or tightening the bolts do not damage the multi-points of the dual mass flywheel.
-- Remove the bolts -arrows- and then remove the dual mass flywheel -1-.
-- To do so, use the Wrench - 21mm :T40263 , Adapter :T40314 and 24mm socket to counterhold the vibration damper.