Potential Equalization Measurement

WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

After installing the high-voltage components or potential equalization cables on the applicable high-voltage components a potential equalization measurement must be performed.

-- Connect the Vehicle Diagnostic Tester.

-- Select the ODIS service and start.

-- Select the tab special functions .

-- Select one after the other:

High Voltage
Potential equalization measurement on high-voltage components

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.