Overview - Electric Drive Motor

WARNING: This page is about a different car, the 2025 Audi A4 allroad and 2025 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Electric Drive Motor

Courtesy of AUDI OF AMERICA, LLC

Transmission
- Removing and installing. Refer to TRANSMISSION, REMOVING .
Seal
- If damaged replace the connector housing
Drive Motor Rotor Position Sensor 1 -G713-
- Removing and Installing. Refer to Drive Motor Rotor Position Sensor 1 -G713-, REMOVING AND INSTALLING: .
Clamp
Cap
- For the connector housing
Bolt
- Always replace after removing
- 4 Nm +45°
Bolt
- Quantity: 7
- Always replace after removing
- 4 Nm +45°
Bolt
- Quantity: 2
- Always replace after removing
- 8 Nm +45°
Oil Return Flange
- Removing and Installing. Refer to OIL RETURN CONNECTION, REMOVING AND INSTALLING .
Seal
- After removal, replace the Three-Phase Current Drive -VX54-
Seal
- Always replace after removing
Bolt
- Quantity: 7
- Always replace after removing
- 16 Nm + 90°
Alignment Sleeve
- Quantity: 2
Seal
- For the input shaft
- Removing and Installing. Refer to INPUT SHAFT SEAL, REPLACING .
Spring
- Remove using the T-Handle Hook :3438
Bolt
- Quantity: 2
- Always replace after removing
- 4 Nm +45°
Drive Motor Temperature Sensor -G712-
- Removing and Installing. Refer to Drive Motor Temperature Sensor -G712-, REMOVING AND INSTALLING .
O-Ring
- Always replace after removing
Three-Phase Current Drive -VX54-
- For the transport or servicing it may be necessary to turn the Three-Phase Current Drive -VX54- using the Hybrid Module Turning Tool :T40410/1 .
- Removing and Installing. Refer to Three-Phase Current Drive -VX54-, REMOVING AND INSTALLING .
  CAUTION:
  Risk of damaging the engine after replacing the, or the dual clutch.
  
  - Adjust the Three-Phase Current Drive -VX54- decoupler and calibrate it. Refer to [For transmission(s) 0CJA] Clutch .
Lower Mount
Upper Mount
O-Ring
- After removal, replace the Three-Phase Current Drive -VX54-
O-Ring
- After removal, replace the Three-Phase Current Drive -VX54-