LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Camshaft Housing, Removing And Installing >> Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing >> Removing

Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Removing

GWWA20-11735Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -2- and disconnect the hose for the EVAP system.

-- Always seal off any open lines and connections with plugs that are thoroughly cleaned from the Engine Bung Set :VAS 6122  .

All procedures are described under: CAMSHAFT HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals