Vibration Damper, Removing And Installing, 2.9L Engine: Removing
Depending on the model, preliminary work may be required. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the generator ribbed belt. Refer to RIBBED BELT FOR GENERATOR, REMOVING AND INSTALLING, 2.9L ENGINE .
-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 2.9L ENGINE .
-- If still installed, remove the cover, remove the bolt -arrow- and the idler roller.
-- Place the Adapter :T40330/4 with Counterholder :T40330/1 on the vibration damper and secure using the bolt -arrow- (23 Nm); to do so, place the Spacer Sleeve :T40330/7 underneath.
-- Remove the bolt -1-.
-- Remove the bolt -arrow- and remove the counterholder and vibration damper.