Ribbed Belt For A/C Compressor, Removing And Installing, 3.0L Engine: Installing
Install in the reverse order of removal, while noting the following:
-- Install the ribbed belt. Refer to Figure.
-- To tension the A/C compressor ribbed belt the tensioner must be pivoted all the way counter-clockwise -arrow B- using the TORX T55 socket. (The tensioner remains in the tensioned position.)
-- Tighten the bolt -1-.
-- Check whether the ribbed belt is routed correctly.
-- Install the generator ribbed belt. Refer to RIBBED BELT FOR STARTER GENERATOR, REMOVING AND INSTALLING, 2.9L ENGINE or Refer to RIBBED BELT FOR GENERATOR, REMOVING AND INSTALLING, 3.0L ENGINE .
-- Start the engine and check the ribbed belt routing.