Vibration Damper, Removing And Installing, 3.0L Engine: Removing

-- Remove the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to FRONT BUMPER .

-- Release the catches -arrow- and remove the air ducts -1 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the lower air duct -2-.

-- Remove the left and right bolt -2- and push the radiator bracket -1- with the bolt toward the front -arrow-.

Courtesy of AUDI OF AMERICA, LLC

All additional procedures are described under: VIBRATION DAMPER, REMOVING AND INSTALLING .