LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Vibration Damper, Removing And Installing, 2.9L Engine >> Removing

Vibration Damper, Removing And Installing, 2.9L Engine: Removing

-- Remove the radiator with fan shroud. Refer to RADIATOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the bolt -arrow-.

GWWA19-12720Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -1-, remove the coolant hose and push the front coolant pipe on the lower left side to the side.

All additional procedures are described under: VIBRATION DAMPER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals