LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Removing

Engine Support, Removing And Installing: Removing

-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

Left Engine Support:

GWWA13-11221Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the engine support -1-.

Right Engine Support:

GWWA19-12537Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the right drive axle cover. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Remove the bolts -arrows- and push the right coolant pipe slightly to the side. (Shown on vehicle with 3.0L engine).

-- Remove the bolts -arrows- and the engine support -1-.

GWWA13-11222Courtesy of AUDI OF AMERICA, LLC