Radiator Shutter, Removing And Installing: Removing
-- Remove the impact member. Refer to BUMPER CARRIER, REMOVING AND INSTALLING .
WARNING:
Risk of injury due to involuntary deployment.
- Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Equipment version with pedestrian protection: disconnect the connector -1- from the pedestrian protection crash sensor and free up the wiring harness -2-.
-- Disconnect and free up the connector -3-.
-- Remove the left and right bolts -arrows-.
-- Push the mounting bracket -2- with the release cable for the release lever hook in the direction of the lock carrier.
-- Remove the radiator shutter -1- toward the front.