LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING, 2.9L ENGINE >> Removing

Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING, 2.9L ENGINE: Removing

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the left front coolant pipe. Refer to LEFT FRONT COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .

All additional procedures are described under: Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .

Additional procedures:

-- Install the left front coolant pipe. Refer to LEFT FRONT COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Install the radiator. Refer to RADIATOR, REMOVING AND INSTALLING, 2.9L ENGINE .