Right Coolant Pipe, Removing And Installing: Removing
-- Disconnect the ground cable from the battery terminal. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the right drive axle cover and right front wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove the generator. Refer to GENERATOR, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Remove the bolt -arrow- and move the bracket -1- and wiring harness to the side.
-- Place the Shop Crane - Drip Tray :VAS 6208 underneath.
-- Loosen the hose clamps -1 and 2- and remove the coolant hoses.
-- Remove the bolts -arrows- using the Socket - T30 :T10405 and remove the coolant pipe. (Shown on vehicle with 3.0L engine).