LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Rear Coolant Pipe, Removing And Installing, 2.9L Engine >> Removing

Left Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .

-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Vehicle with particulate filter: remove the left catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, 2.9L ENGINE WITH PARTICULATE FILTER .

-- Remove the bolt -1-.

GWWA19-12743Courtesy of AUDI OF AMERICA, LLC

-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Free up the wire.

-- Remove the bolts -arrows- and remove the coolant pipe -2-.