Front Coolant Pipe, Removing And Installing, 3.0L Engine: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 3.0L ENGINE .

-- Remove the upper air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING, 3.0L ENGINE .

-- Remove the generator ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Position the Counterhold - Multiple Use :T10172A  with the Counterhold - Kit - Adapter 10 :T10172/10  on the belt pulley -1- and remove the bolts -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the belt pulley.

-- Remove the bolts -arrows- and remove the front coolant pipe -1- from the right cylinder head and from the shut-off valve.

Courtesy of AUDI OF AMERICA, LLC