Coolant Ventilation Line To Cylinder Head, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Electronic Parts Information (ETKA).
• Replace the O-rings after removing them.

Fig 1: Cylinder Bank 1 (Right) Coolant Ventilation Line, Installing

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -1- to 9 Nm.

Fig 2: Cylinder Bank 2 (Left) Coolant Ventilation Line, Installing

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -arrow- -3- to 9 Nm.

-- Check the coolant. Refer to Coolant Level, Checking .