Air Duct Pipe, Removing And Installing, With Radiator Removed 2.9L Engine: Removing
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Loosen the hose clamps -arrows- and remove the air duct hose -1-.
-- Disconnect the connector and free up the wiring harness.
- For the Charge Air Cooler Temperature Sensor 2 -G764-
- For the Charge Air Cooler Temperature Sensor 1 -G763-
-- Remove the oil filter element. Refer to Maintenance Work; Engine Oil; Oil Filter, Replacing, and cover the opening with a clean cloth.
-- Remove the bolts -arrows-.
-- Remove the crankcase ventilation hose -2- by pressing the release buttons on both sides.
-- Move the air duct pipe -1- to the side.
-- Free up the coolant line -2-.
Vehicles with version 1 charge air system:
-- Loosen the hose clamps -1 and 3- and remove the air duct hose.
Vehicles with version 2 charge air system:
-- Remove the left front wheel. Refer to WHEELS AND TIRES .
-- Remove the left air intake grille. Refer to FRONT BUMPER .
-- Remove the left air guide. Refer to OVERVIEW - LOCK CARRIER .
-- Disconnect the connector -2- for the Charge Air Pressure Sensor -G31-.
-- Loosen the hose clamps -arrows- and remove the air duct pipe -1-.
Continuation for All Vehicles:
-- Press the release buttons on both sides and remove the EVAP system hose -arrow-.
-- Free up the wiring harness.
-- Remove the bolts -arrows-.
-- Remove the crankcase ventilation hose -1- by pressing the release buttons on both sides.
-- Disconnect the connector and free up the wiring harness -2-.
- 4 - For the Manifold Absolute Pressure Sensor -G71-
- 5 - For the Throttle Valve Control Module -GX3-
-- Remove the vacuum hose -6- and hose -3- for the crankcase ventilation to do so press the release buttons on both sides.
-- Remove the bolts -arrows-.
-- Pivot the air duct pipe -1- carefully to the left side and remove.