Final Drive Identification, Basic Final Drive, 0DB, 0D2 And 0G2

The "0DB" rear final drive is assigned to the following transmissions:

• 7-Speed Dual Clutch Transmission 0CK AWD

The "0D2" and "0G2" rear final drive is assigned to the following transmissions:

• 8-Speed Automatic Transmission 0D5 AWD
• 8-Speed Automatic Transmission 0D7 AWD (only Q7 Hybrid)

Rear final drive allocation

• Refer to TRANSMISSION/ENGINE ALLOCATION 

Location on Rear Final Drive 0DB, 0D2 and 0G2

Courtesy of AUDI OF AMERICA, LLC

• -Arrow A- barcode sticker with part number and production date
• -Arrow B- codes, serial number and production date

Example of barcode sticker with part number and production date

Courtesy of AUDI OF AMERICA, LLC

• -Arrow A- final drive >>0D2<< with part number (example: 0D2 500 043C)
• -Arrow B- rear final drive build date

Example:	17	05	15
	I	I	I
	Day	Month	Production year -2015-

• -Arrow C- code -QCD-

Additional data can be ignored.

Example of date of manufacture of the rear final drive

Courtesy of AUDI OF AMERICA, LLC

• -Arrow A- code -QCD-
• -Arrow B- serial number -00614-
• -Arrow C- production date

Example:	QCD	00614	M	15	05	17
	I	I	I	I	l	l
	Codes	Series number	Manufacturer	Production year -2015-	Month	Day

Additional data can be ignored.

• When installing a new rear final drive, not only the final drive code but also the PR number and the vehicle engine code must be verified in the appropriate Electronic Parts Information (ETKA). This is the only way to assure the correct allocation.