INPUT SHAFT SEAL, REPLACING, "quattro sport", 0D3: Notes

Special tools and workshop equipment required 

• Puller - Multiple Use :VW 391 
  Fig 1: Puller - Multiple Use VW391

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Unit Injector :T10055 
  Fig 2: Identifying Puller T10055

  Courtesy of AUDI OF AMERICA, LLC
• -2- Puller - Unit Injector - Adapter 2 :T10055/2 
• Two M 8 x 30 Bolts
• Seal Installer - Hollow Shaft :T10380 
  Fig 3: Identifying Thrust Piece - T10380

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Input Shaft :T40222 
  Fig 4: Assembly Tool T40222

  Courtesy of AUDI OF AMERICA, LLC
• Guide Sleeve :T40222/1 
• Sealing Grease :G 052 128 A1 
• Inductive Heater :VAS 6414 
  Fig 5: Identifying Inductive Heater VAS 6414

  Courtesy of AUDI OF AMERICA, LLC
• or
• Commercially Available Hotplate and Digital Thermometer :VAS 6519 
  Fig 6: Identifying Digital Thermometer VAS 6519

  Courtesy of AUDI OF AMERICA, LLC