LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> S4 Premium >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Final Drive, Differential (7-Speed Dual Clutch Transmission 0CK, 0CJ, 0DP, 0DN) >> 39 Final Drive, Differential >> Final Drive >> Left Flange Shaft, Removing And Installing >> Removing

Left Flange Shaft, Removing And Installing: Removing

-- Remove the left drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .

-- Remove the left drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .

-- Remove the left shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

Fig 1: Identifying Bolts & Flange Shaft Mounting Bracket
GWWA30-10170Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower cover -arrow- from the transmission.

GWWA39-10659Courtesy of AUDI OF AMERICA, LLC

-- Support the flange shaft when removing it through the transmission opening so that the seal is not damaged.

GWWA39-10660Courtesy of AUDI OF AMERICA, LLC

-- Remove the left flange shaft from the transmission -arrow A-.

Fig 2: Identifying Left Flange Shaft
GWWA30-10171Courtesy of AUDI OF AMERICA, LLC