Overview - Screen Separator

Fig 1: Exploded View Of Screen Separator

Courtesy of AUDI OF AMERICA, LLC

Screen Separator Mount Trim
- Clip into the rear seat backrest
Screen Separator Bracket Rubber Grommet
- Slide over the bracket and insert into the trim panel
Bolt
- 3 each
- 4.5 Nm
Screen Separator Bracket
- Quantity: 2
- Removing and Installing. Refer to SCREEN SEPARATOR BRACKET, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Screen Separator Mounting Eye
- Quantity: 4
- Removing and Installing. Refer to SCREEN SEPARATOR MOUNTING EYE, REMOVING AND INSTALLING .
- Position the securing tab on the mounting eye in the opening in the body
Screen Separator
Guide Rail
- Insert into the mount
Screen Separator Mount
- Quantity: 2
- Bolted to the rear seat backrest
- Removing and Installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
Bolt
- 3 each
- Self-locking
- Replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 9 Nm