Inner Thorax Airbag, Removing And Installing: Removing
The thorax airbag with Driver Side Front Center Airbag Igniter for Occupant Contact Protection -N737- will be called the thorax airbag in the information that follows.
-- Switch off the ignition and electrical equipment.
-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Remove the cover with cushion from the backrest. Refer to Backrest Cover and Cushion, Removing and Installing .
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Release the connector lock -2- in the -direction of the arrow-.
-- Disconnect the connector -3-.
-- Remove the bolts -5-.
-- Remove the clip -4- using the Release Tool : T10236 .
-- Remove the bolt -8-.
-- Guide out the thorax airbag -1- from the rear seat backrest and remove.