Seat Position Sensor, Removing And Installing: Installing
Install in the reverse order of removal, while noting the following:
-- Hook the bracket -2- into the upper seat rail and clip it in.
-- Slide the seat position sensor -4- on the bracket and position at a distance -a- = 4.0 mm to the lower seat rail -1-.
-- To do this, place the Gauge - Gap Adjustment :3371 4 mm between the seat position sensor and the lower seat rail and tighten the bolt -3-.
-- Replace any fasteners that are damaged.
-- Make sure the connectors audibly engage when connecting them.
-- Make sure the wires are not pinched.