Left/Right Front Seat Belt NX10/NX11, Removing And Installing: Removing

-- Switch off the ignition and electrical equipment.

-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.

-- Remove the front sill panel. Refer to Front Sill Panel, Removing and Installing .

-- Remove the rear sill panel. Refer to Rear Sill Panel, Removing and Installing .

-- Remove the B-pillar upper trim panel. Refer to B-Pillar Upper Trim Panel, Removing and Installing .

-- Remove the B-pillar lower trim panel. Refer to B-Pillar Lower Trim Panel, Removing and Installing .

-- Remove the front belt end fitting. Refer to Front Belt End Fitting, Removing and Installing  .

-- Remove the front seat belt guide. Refer to Front Seat Belt Guide, Removing and Installing  .

-- Remove the bolt -1- and the seat belt relay -2- with belt webbing.

Courtesy of AUDI OF AMERICA, LLC

Base Version:

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

-- Remove the front three-point seat belt -2-.

Continuation for all vehicles

Equipment Version: Reversible Power Version

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the clip -upper arrow-.

-- Remove the bolt -lower arrow-.

-- Remove the front three-point seat belt -3-.

Continuation for all vehicles