Left/Right Front Seat Belt NX10/NX11, Removing And Installing: Installing
Install in the reverse order of removal, while noting the following:
-- Replace any fasteners that are damaged.
-- Make sure the connectors audibly engage when connecting them.
-- Make sure the wires are not pinched.
-- Insert the front seat belt with anti-twist mechanism -1- in -the direction of the arrow- into the mount and tighten the bolt.
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Keep as far away as possible from the pyrotechnic component when switching the ignition on.
-- Switch the ignition on.
-- For vehicles with Left Front Seat Belt Tensioner Control Module -J854- or Right Front Seat Belt Tensioner Control Module -J855-, adapt the components to the Airbag Control Module -J234- using a Vehicle diagnostic tester after replacing the seat belt.