Driver/Front Passenger Thorax Airbag Crash Sensor G179/G180, Removing And Installing: Removing
-- Switch off the ignition and electrical equipment.
-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Remove the front door trim panel. Refer to Front Door Trim Panel, Removing and Installing .
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Pull the connector lock out and unlock it.
-- Disconnect the connector.
-- Release the anti-twist mechanism -2- and turn the crash sensor -1- approximately 45° in the -direction of the arrow-.
-- Disengage the crash sensor -1- and remove it.