LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> Q4 e-tron Prestige >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags, Seat Belts >> 69 Passenger Protection, Airbags, Seat Belts >> Airbag Crash Sensors >> Driver/Front Passenger Thorax Airbag Crash Sensor G179/G180, Removing And Installing >> Installing

Driver/Front Passenger Thorax Airbag Crash Sensor G179/G180, Removing And Installing: Installing

Install in the reverse order of removal, while noting the following:

CAUTION:

Pyrotechnical components can deploy unintentionally.

Risk of injury.

- Discharge the static electricity: quickly touch the door striker.

-- Attach the connector until it clicks into place.

-- Make sure the wire is not pinched.

-- For the crash sensor to function correctly, ensure the door seals correctly.

CAUTION:

Pyrotechnical components can deploy unintentionally.

Risk of injury.

- Keep as far away as possible from the pyrotechnic component when switching the ignition on.

-- Switch the ignition on.

-- Check and clear the DTC memory using the Vehicle diagnostic tester .