Rear Electric Drive Power And Control Electronics, Removing And Installing: Notes

Special tools and workshop equipment required 

• Cover :T10662/1 
• Cover :T10662/2 
• Torque Wrench 1783 - 2-10 Nm :V.A.G 1783 
• Torque Screwdriver :VAS 275 003/2-1 
• ESD Work Surface :VAS 6613 
• Brass Wire Brush :VAS 294 025 
• Cover :T10668 
• Cleaning Solution :D 291 091 A1 
• Scraper :VAS 294 027 
• Anti-Rotation Protector :T10687 

The Electric Drive Power and Control Electronics -JX1- will be called the power electronics in the information that follows.

The Three-Phase Current Drive -VX54- will be called the three-phase current drive in the information that follows.