Terminal, Cleaning: Removing

-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the cap nut.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the terminal -2-.

-- Check the terminal -2- for corrosion and contamination.

-- Position the adapter from the Contact Surfaces Cleaning Set :VAS 6410  -1- in the terminal -2- and twist in the -direction of the arrows- to grind off.

-- Remove the burr on the terminal -1- with the deburrer -A- from the contact surface cleaning set.

Courtesy of AUDI OF AMERICA, LLC