Overview - Rear Seat Backrest

The ² /₃ rear seat backrest is shown in the overview as an example

Fig 1: Exploded View Of Rear Seat Backrest, A3

Courtesy of AUDI OF AMERICA, LLC

1. Nut
   • Tightening specifications. Refer to Overview - Outer Rear Three-Point Seat Belt .
2. Center Belt End Fitting/Right Seat Belt Latch
   • Refer to Rear Seat Belt Latch, Removing and Installing .
3. Outer Bearing Sleeve
   • Refer to OUTER BEARING SLEEVE, REMOVING AND INSTALLING 
4. Right Backrest
   • Equipment version: with pass-through door
   • Refer to Pass-Through Door, Removing and Installing  .
5. Center Bearing Securing Bracket
6. Bolt
   • 9 Nm
7. Inner Bearing Sleeve
   • Refer to INNER MOUNTING PIN, REMOVING AND INSTALLING 
8. Inner Mounting Pin
   • Refer to INNER MOUNTING PIN, REMOVING AND INSTALLING 
   • 15 Nm
9. Intermediate Bearing Rear Cover
10. Intermediate Bearing Front Cover