Diagnostic Entries

Diagnostic entry with the Vehicle Diagnostic Tester.

• Turn on and connect the Vehicle Diagnostic Tester.
• Switch the ignition on.
• Select "Diagnostic" operating mode and "Start diagnostics".
• Select the "Test plan" tab.
• Select the "select individual test" button and choose the test program under "diagnostic-capable systems" :

J136 - Memory Seat/Steering Column Adjustment Control Module, Replacing

• 0036 - Memory Seat/Steering Column Adjustment Control Module -J136
• 0036 - Driver Side Seat Adjustment, Functions
• 0036 - Control Module, Replacing