Sill Panel Trim, Removing And Installing: Removing
-- Remove the inner door seal in the area of the sill panel trim from the body.
Sill Panel Trim Illuminated
-- Remove the front sill panel. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Free up the wiring harness -2-.
Continuation for all vehicles
-- Carefully warm up the sill panel trim -1- using the Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A .
-- Carefully pry out the sill panel trim -1- from the side sill -arrow- using the Trim Removal Wedge :3409 . Do not damage the paint coat while doing so.