Seat Pan Cover And Cushion, Removing And Installing: Removing
-- Mount the front seat to the seat repair bracket. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the front backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
Vehicles with front child seat anchor
-- Remove the front child seat anchor. Refer to FRONT CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
Vehicles with fire extinguisher mount
-- Remove the fire extinguisher mount. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
North American Market-Specific Version: with seat occupant detection system
-- Pay attention to the information on the seat occupant detection system. Refer to COMPONENT LOCATION OVERVIEW - SEAT OCCUPANT DETECTION SYSTEM .
Continuation for all vehicles
Seats without seat depth adjuster
-- Detach the molding -1-, -2- and -3- from the cover in the front and side areas using the Backrest Panel Tool :3370 .
Seats with seat depth adjuster
-- Move seat depth adjuster forward.
-- If equipped, release, disconnect and free up the connector -2-.
-- Remove the nuts -1-.
-- Unclip the seat depth adjuster at the tabs -arrows- and remove it upward from the seat pan.
-- Pivot the seat depth adjuster upward and disengage it at the tabs -3- from the seat pan.
-- Disengage the molding -1- and -2- on the cover at the side using the Backrest Panel Tool :3370 .
Continuation for all seats
-- Detach the hooks -arrows-.
-- Disengage the cover molding -1- using the Backrest Panel Tool :3370 .
-- Equipped on some models: free up the seat heating wiring harness from the seat pan. For this, disconnect the modular wiring routing. Refer to MODULAR WIRING ROUTING, DISCONNECTING AND CONNECTING .
-- Detach the cushion with cover from the seat pan and remove including the seat depth adjuster. If equipped, guide out the seat heating wiring harness.