Outer Seat Trim Panel, Removing And Installing: Removing
-- Unscrew the front seat and flip it toward the front with the wires still connected. Refer to Front Seat, Removing and Installing .
Vehicles with manual backrest adjuster
-- Remove the backrest adjustment handle. Refer to BACKREST ADJUSTMENT WHEEL, REMOVING AND INSTALLING .
Vehicles with manual seat height adjustment
-- Remove the seat height adjustment handle. Refer to Seat Height Adjustment Handle, Removing and Installing .
Continuation for all vehicles
-- Release the hooks -1- using a flat-head screwdriver.
-- Remove the expanding rivet -3-.
-- Disengage the side sill side seat trim panel -2- at the rear bracket -arrow A- and then remove upward from the bracket -arrows B-.
Vehicles with Power Seats
-- Remove the lumbar support adjustment switch/switch module. Refer to Lumbar Support Adjustment Switch Module, Removing and Installing .
-- Release and disconnect the connectors -1-, -2- and -3-.
-- Free up the wiring harness.
Continuation for all vehicles
-- Remove the side sill side seat trim panel.